Commercial metal roofing for Michigan.
Standing seam and exposed-fastener metal roof systems engineered for Michigan snow and wind — installed to manufacturer spec on low-slope and steep-slope commercial buildings, by a crew that has built them for 42 years.
Get your free metal roof estimate
Tell us about your building — we'll be in touch within one business day.
The 60-year commercial roof.
Commercial metal roofing earns its reputation the hard way: 40–60+ years of service life, unmatched snow-shedding, and wind performance that keeps working long after other systems give up — at a lifetime cost that makes sense.
We install standing seam and exposed-fastener metal systems on commercial buildings across Michigan — low-slope and steep-slope alike — with Kynar/PVDF finishes that resist fade for decades. Retrofit over an existing built-up or modified bitumen roof is often possible, and aging metal can be restored with rust remediation, seam sealing, and restoration coatings.
From a retrofit over an existing roof to a brand-new standing seam system, we spec the panel, gauge, and attachment for your building — not the thinnest assembly we could bid. For other systems, see our commercial roofing, TPO, and EPDM pages.
Anatomy of a metal roof.
The metal panel is the visible layer of an engineered assembly. Get any of the six layers wrong and the system can't do its job — here's how we build a metal roof that lasts.
Structural deck
We assess the existing deck — steel, wood, or concrete — and confirm it's sound before the new metal assembly goes down.
Insulation layer
Rigid board or blanket insulation to the R-value your building and budget call for — a thermal break that also quiets rain and controls condensation.
Substrate & underlayment
Solid decking or purlins with a high-temperature synthetic underlayment — the secondary water barrier that protects the building while the panels do the heavy lifting.
Metal panels
Standing seam or exposed-fastener panels in the gauge and profile your roof calls for — finished in fade-resistant Kynar/PVDF colors.
Concealed-clip seams
Standing seam panels lock over concealed clips that let the metal expand and contract with Michigan's temperature swings — the difference between a 60-year roof and one that works its fasteners loose.
Flashing & snow retention
Ridges, valleys, curbs, penetrations, and edge metal detailed and sealed right — plus engineered snow retention where sliding snow threatens entries and equipment.
What makes metal stand out.
Decades of service life, snow-country performance, and finishes that keep their color — with options to fit your building.
40–60+ Year Life
Proven LongevityA properly installed commercial metal roof delivers 40–60+ years of service — often the last roof a building needs under the same ownership.
Built for Snow & Wind
Michigan-ReadyMetal sheds snow instead of holding it and carries some of the strongest wind ratings in roofing — performance built for Michigan winters.
Standing Seam Precision
Concealed FastenersConcealed-clip standing seam panels lock down tight with no exposed fasteners on the field of the roof — clean lines and fewer points of failure.
Retrofit-Friendly
Over Existing RoofsIn many cases a metal system can go over the existing roof — less tear-off, less disruption, and less downtime for the building below.
Low Lifetime Cost
Best Value Per YearMetal costs more up front and less over its life — spread across 40–60+ years of service, it's one of the lowest cost-per-year roofs you can buy — see how it stacks up against typical roof replacement costs in Michigan.
Restorable & Recoatable
Second LifeAging metal rarely needs to come off — rust remediation, seam sealing, and recoating restore performance and add years of service.
Complete metal roof services.
Installation, replacement, repair, and restoration — full lifecycle service for your commercial metal roof.
New Metal Roof Installation
Metal Roof Replacement
Metal Roof Repair
Rust & Seam Restoration
Snow Retention Systems
Maintenance & Inspection
A metal roof built for Michigan winters.
A roof assessment, a system spec built for your building, and precision installation from an experienced metal crew — with no pressure.
Get My Free Estimate →How a metal roof project works.
Five steps from assessment to a tight, documented metal roof — spec'd for your building, built to last.
Assessment
We inspect the roof, deck, and existing assembly, and confirm whether a retrofit over the existing roof is on the table.
System Spec
We spec the panel profile, gauge, finish, and attachment for your building — with itemized pricing and warranty options.
Tear-Off / Retrofit Prep
Old roof removed or prepped for retrofit, deck repaired, and underlayment and insulation installed.
Panel Installation
Panels set straight and locked to spec, clips and fasteners torqued right, and every flashing detail sealed.
Inspection
We walk every seam, check every detail, and confirm the roof is watertight before we hand it off.
What commercial metal roofing costs in Michigan.
Nobody in commercial roofing publishes prices. We think that's backwards — you're building a budget, and you deserve real numbers before you ever sit through a sales call. These are honest planning ranges for typical commercial projects in Michigan.
Engineered panels, concealed fasteners, full trim and flashing package — a 40-year-class roof.
New metal or membrane system over an existing metal roof — no tear-off, minimal disruption.
Fastener back-out, seam sealing, panel replacement, and curb re-flashing.
What moves the number:
- Tear-off vs. recover — removing the old roof adds cost, but resets the clock and lets us fix what's underneath.
- Wet insulation & deck repair — found by core samples and moisture scans, and priced before work starts — never a mid-job surprise.
- Code-required insulation — Michigan energy code sets the R-value; more insulation costs more up front and less every month after.
- Edge metal, curbs & penetrations — detail work is where the labor lives; a cluttered roof costs more than a clean one.
- Access, height & staging — how hard it is to get material up and debris down changes the number.
- Warranty term — a 15-, 20-, or 30-year no-dollar-limit warranty changes the spec, not just the paperwork.
42 years. One standard.
The kind of track record that only comes from doing it right, in the same communities, for a very long time.
“A metal roof is only as good as its details. We set every panel straight and seal every termination — because the details are the whole roof.”
Family-run since 1984 and trusted on commercial metal across Michigan. We panel it right, flash it right, and back it with manufacturer warranties — from new standing seam to full restoration.
Why owners choose us for metal.
Precision installation, honest specs, documented work, and 42 years of commercial roofing in Michigan weather.
Manufacturer-Spec Installation
We install metal systems to manufacturer spec and NRCA industry guidelines — the requirement for the finish and weathertight warranties that protect your investment.
Standing Seam Done Right
Concealed-clip seams that let the panels move with Michigan's freeze-thaw are what separate a 60-year roof from a callback — we set and lock every one.
Snow-Country Engineering
Snow-shedding profiles, engineered snow retention, and wind-rated attachment — designed for the loads Michigan actually delivers.
The Right Spec, Not the Cheapest
Panel profile, gauge, finish, and attachment — we spec what your building needs, not the thinnest assembly we can bid.
42 Years in Michigan
Family-run since 1984. We've installed and serviced commercial roofs across Michigan's full range of weather — and we know how metal behaves here.
Manufacturer Warranties
Finish warranties on Kynar/PVDF coatings and weathertight system options — backed by quality-controlled, documented installation.
Factory-certified across the low-slope spectrum: Elevate (Firestone) · GenFlex · Mule-Hide · IB Roof Systems · GAF · Gaco silicone coatings.
Response times you can put in your vendor file.
Every roofer says “fast response.” We'd rather commit to numbers you can hold us to.
A human, same business day.
Every commercial call or inquiry gets a response from a person the same business day — not a voicemail loop, not a callback queue.
Leaks go to the front of the schedule.
Report a leak and it jumps the queue — a technician on your roof inside the week, prioritized by severity, with maintenance-program buildings first in line. A documented visit that actually happens, not an emergency-line promise that doesn't.
A photo report after every visit.
What we found, what we did, and what to budget — photo-documented and sent to your file after every single visit. Your records, not our word.
Hold us to it — Port Huron (810) 984-3420 · Troy (248) 453-1717
Commercial metal roofing FAQs.
What we install — and what we don't.
Most commercial roofers claim every system in the book. We'd rather be honest about where we're excellent — and say so in writing.
We install & service
- TPO, EPDM & PVC single-ply systems — full replacement, recover, and repair, installed to manufacturer spec.
- Commercial metal roofing — standing-seam and screw-down systems, new and retrofit.
- Silicone, acrylic & liquid-applied coatings — roof restoration that defers replacement for a decade or more.
- Preventive maintenance programs — scheduled, photo-documented, warranty-compliant.
We don't — on purpose
- Spray polyurethane foam (SPF) roofing. We believe coatings and single-ply membranes serve Michigan's freeze-thaw climate better over the long haul — so we don't sell foam.
- New built-up (BUR) or modified bitumen installs. We repair and restore existing BUR and mod-bit roofs every week — but when replacement day comes, we'll spec a modern single-ply instead of selling you yesterday's system.
If your project needs something we don't do, we'll tell you on the first call — and point you toward someone good. That's the fastest way to earn the next roof.
Commercial metal roofing across Michigan.
With offices in Port Huron and Troy, we serve building owners and property managers throughout the region.
Considering a metal roof?
Get a free assessment and a system spec built for your building — panel profile, finish, and warranty options laid out clearly, with installation from an experienced metal crew.